Epoxy Flooring in Milan, MI

We provide epoxy flooring in Milan on both sides of the Washtenaw and Monroe county line. City limits split close to evenly between the two counties. The center of town and most of the older homes are on the Washtenaw side. The Saline River, a tributary of the River Raisin, runs through the middle. That layout gives us a good sense of what a garage or basement will look like before we arrive.

Older Washtenaw-side homes

Milan was settled in 1831, got its post office as Farmersville in 1833 and took the name Milan in 1836. It became a village in 1885 and a city in 1967. Homes near the old center tend to have the floors we expect from age: detached or tucked-in garages, slabs with old paint or sealer, settled sections and cracks patched more than once.

For those floors, prep is most of the job. We diamond grind the full surface, edges included. Loose coatings come off, oil spots get cleaned and cracks and spalls are filled before the first coat.

Newer homes on the edges

Milan had 1,999 housing units in 2000, 2,487 in 2010 and 2,579 in 2020. Many homes in town are a couple of decades old or less. Their attached garages are usually larger and in better shape, but the slab often has a smooth, dense finish. A coating will not stick to that until it is ground open. Newer homes also tend to have finished basements, which is where metallic epoxy floors and basement floor epoxy come in.

Get a Free Estimate

Near the Saline River

The river passes through the center of town, and homes close to it can see more moisture in the basement. We moisture-test every basement slab before quoting. A damp slab gets a vapor-tolerant primer. Standing water or active leaks need a fix before any coating goes down.

A town with an industrial past

Milan's Community House started in 1834 as a gristmill. Henry Ford bought it in 1935 and used it to process soybeans for automotive paint. Workshops and outbuildings are still common around town. For those, we offer shop and commercial floor epoxy in thicker builds that stand up to rolling tool chests, jack stands and dropped parts.

Services we install in Milan

1. Garage floor epoxy with a clear topcoat for winter salt 2. Epoxy flake floors for texture and an easy-to-clean finish 3. Polyaspartic floor coating for a quicker return to service 4. Basement floor epoxy after a moisture test 5. Metallic epoxy floors for finished lower levels 6. Shop and commercial floor epoxy for workshops and small businesses

Every job starts with a free visit to measure the floor and check its condition. The written quote that follows names the system, the prep and the total.

Choosing between epoxy and polyaspartic

Both work well on a Milan garage. A 100% solids epoxy base builds thickness and fills small surface flaws. A polyaspartic topcoat cures faster and handles a wider range of temperatures, which helps on a cool spring or fall day. Many of our garage jobs use both: an epoxy base for build and a polyaspartic or clear topcoat for wear. We explain the options at the estimate and put the system we recommend in writing, along with the reason for it.

Caring for the floor once it is down

Sweep or dust-mop grit regularly, since sand under tires is what scuffs a topcoat over time. Wipe up oil and fluids when you notice them. In winter, push slush out the door with a squeegee and rinse the floor in spring once salt season ends. Skip acid cleaners and harsh degreasers. Mild soap and water handle almost everything on a coated floor.